[David]

David on December 25, 2022 at 4:44 am #21750

If you can scan the “5” from somewhere (or even the other side of the cowl), there are plenty of shops that can laser or water jet cut some aluminum of the appropriate thickness. Many are online.

[Nicholas Geber]

Nicholas Geber on December 24, 2022 at 8:26 pm #21749

Hi Kent, I’ll have measure the thickness, but it can’t be more than a couple of millimeters. Actually, I only need the “5” for one side as everything else is intact

[David]

David on December 24, 2022 at 10:10 am #21746

Nicholas,
I have the ones I removed from my Cherokee D, but would not have the 235 C

Dave

[Kent Dellenbusch]

Kent Dellenbusch on December 23, 2022 at 3:04 pm #21744

Hi Nicholas. I’d give Steve’s guys a try. Do you have a part number by any chance? There are always 3d printing options. I have reached out to a guy out here who has done metal work for me a couple of years back. I forwarded your picture to him. I’ll keep you posted.
Do you know the thickness of your logos?

[Nicholas Geber]

Nicholas Geber on December 22, 2022 at 5:05 pm #21743

What I’m looking for is metal, not a decal… see attached… any idea who might have one of these?

[STEVE]

STEVE on December 6, 2022 at 10:59 am #21716

Hi Nicolas;
You probably want two but there’s one decal for sale on eBay: https://www.ebay.com/itm/265485692294.
If that’s what you’re after, I suggest you buy it and then get one of the companies I’ve listed below or any other decal shop to make you one for the other side.
If you have a photo or copy of what you want contact Moody Aerographics at http://www.moodyaero.com.
Another option is http://www.highergraphics.com.
Please let me know what you decide.
Thanks
Steve

[Nicholas Geber]

Nicholas Geber on December 1, 2022 at 6:57 am #21706

I need to replace the cowl logo on my 235. Does anyone have an idea where I could find one?