[John Brown]

John Brown on June 8, 2021 at 7:31 am #20721

Thank you.

The folks over at AEROX got me squared away and did an overhaul on the regulator that I had.

They had some of the large tanks and provided a nice discount because the stock was a bit dusty.

[John Brown]

John Brown on April 25, 2021 at 12:46 pm #20618

Hi Steve, S/N 27-7405325
I’m trying to solve leak problems in the fuel control box located between the front two seats.
We have the “fuel shut off value” which is really the crossfeed control, P/N 492 297. A Scott MOD 4600

Then there is the heater fuel shutoff, Piper P/N 19460-00
And then Cross Feed drain valve. Piper P/N 17946-00

Thank you.

[John Brown]

John Brown on March 1, 2021 at 10:09 am #20544

Hi Thanks for the pointer.
I spoke with Kim there and he said that they can do the work.
Since we might be the first Aztec part he has repaired it would take a bit longer as they would ship the part to an engineering lab to test the materials and then he would have to do some FAA paperwork to get the part number added to their approved list. Once that was done then they could do the work and ship back a yellow tagged repaired part. As the first guy it would be about a month start to stop for the engineering, faa, and repair work.
The next person would have a much shorter period of time….
Kim seemed knowledgeable and the pricing was reasonable (in aircraft monetary units).

Trunnion would be around $1200. The collar would be around $350
These are March 2021 ESTIMATES…